- Joined
- Aug 9, 2010
- Location
- Coral Springs, Florida
Well after 7 months of using the boat I decided it was time to add some grease to the bearings. I pumped about 9 shots from the grease gun in there and then stopped. I think I read somewhere if you put too much in it could blow out the back. I think you are supposed to see old grease coming out but I didn't want to overdo it. Think 9 shots in there is enough or should I keep going until I see old grease coming out? I saw some old black grease in there when I opened it up but I assume that from the heat and colling it goesw through.