ok folks im gona add 2 inch aluminum spacers to my boat to hopfully get the bow up... all my cables will reach this is my last resort but any way. im planin on leavin everyting (cables, wires, ect) hooked up and just lossing the stock bolts on both sides then putting the spacer in one side at a time and tighting the new bolts it comes with .... i know ill have to suport the motor while i add the spacers with a hoist but this motor has no lifting eye... any idea were to put the chains chokers or slings can i wrap a sling arond the tube the motor pivits on while tilting or triming.. i just didnt wont to wrap a sling around a wrong thing a bend or break somthing .. thanks
